The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side. Heater assembly is 15″ long, it is mounted to the...

Gasket, "L", Waterway Ozone or Cluster JetFits a Jet Body with a 2" Jet face diameter, 1" hole size.. Part Type Gasket Jet Part Type Gasket/O-Ring Manufacturer Waterway Inside Diameter 1"id Model Ozone/Cluster Gasket...

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

The BP Series WiFi Module Kit allows you to access your hot tub via a direct connection anywhere in the local proximity of your tub, anywhere in your house that you can connect to your local WiFi network, or anywhere in the world you have an...

This pump is the Waterway Version of an Aqua-Flo XP2 or XP2E.. It is an exact replacement for the Aqua-Flo Xp2e 56fr pump.. Voltage 230V, 60Hz High speed 10 Amps, low speed 3.5 Amps Competitive power 3.5 HP, input power 3.08 HP, output power...

This Kit consists of 4" of 3/4" Inside Diameter Clear Tubing, (2) Clamps and (2) 1" Street x 3/4" Barb Couplers.. This Kit is used to connect your 3/4" pipe connection that is being replaced to a more modern outside barb type seal... You achieve the 3/4"...

This Kit fits a 1019801-03 or 39577-03 Vendor Code 3536 LX 2 HP Pump and Includes an Impeller, Seal, Bearing, Silicon and Seal Installation Tool... It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to the...

This part is a Pump Bleeder Barb fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

This Complete 77712 Wet End fits a 1019801-03 Vendor Code 3536 2 HP 56 Frame Pump.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4...

This LX 1019801-03 or 39577-03 Vendor Code 3536 2HP Impeller, Seal, Silicon and Seal Installation Tool that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face edge to edge, it measures about 3" from...

This Filter is 14-15/16" wide x 14 7/8" tall it has 2 1/8" holes on the top and bottom.   Application Fountain Valley Spas, Martec/Sonfarrel, Santana, Sonfarrel/Advantage Bottom Physical Dimension 2-1/8" Bottom...