Independent Supplier & Replacement Part Notice
We are an independent parts supplier and are not affiliated with, sponsored by, or endorsed by Watkins, Hot Spring, Caldera, Tiger River, or Solana. These names and their part numbers are used only to identify compatibility.
We offer replacement parts as alternatives to spa-branded parts. When this listing identifies a part as the same original-manufacturer replacement, it is supplied under the component manufacturer’s branding and part number, which may differ from the Watkins or spa-brand label and number. Other compatible alternatives are identified in the individual product listing. Please review the listed specifications, fitment details, and any installation differences before ordering.
This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a LX Pump Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 on the label.
It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 15" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.
For the Bleeder Barb That fits this pump click Either of these links one is a 1/4" and one is a 1/2":
NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump!
NOTE about these Replacement Pumps: Watkins Does Not Make Pumps. They buy different brands of pumps and put their numbers on them.. If you want the original Watkins numbers on your new pump we don't offer that.. What We offer is the exact pump or the closest equivalent to the original pump if it is obsolete that they would buy and put their numbers on from the original pump manufacturers. The main difference between one you would buy from them now and ours is the exhaust vent in the back will not come on our pump.. We think it is a bad idea as it does not allow the motor to cool as it was intended to cool and does not have any redeeming quality for you as an end user.. See the below picture for what will NOT come on our pump.. If you must have that feature Watkins is the only source..
Note: If your original Pump has this on the back with a hose attached none of my pumps will have that nor will they be able to accept this part from your old pump.. You will save 100's of dollars over the original pump with that attachment that is only used to put heat from the motor under the tub and I believe the motors stay cooler without that device and last longer..
