For service technicians and DIYers alike, this Aqua-Flo XP2 pump delivers dependable performance with 2.5 horsepower at 230 volts and two speed settings drawing 10.7 amps high and 3.2 amps low. Featuring a 48 frame motor and a 2" by 2" wet end with male buttress thread connections roughly 3" across, it's made to fit your spa system.
Please note, since November 2024, the capacitor position has changed, which might affect your installation. We now supply the motor (rated 10.5 amps) and the 2.5 HP wet end separately for easy onsite assembly — ensuring a proper fit. If your setup can accommodate the side capacitor, just let us know to get the pump fully assembled.
Check compatibility using part numbers like 05525794-2340, 05625356-2370, and others.
| Portable Spa Pump | |
| Speed | 2 Speed (2-Spd) |
| Motor Voltage | 230v |
| Drain Plug Location | 4,6,9 o`clock |
| Pump to Motor Foot Types | 9 |
| Suction Style | Center |
| Suction Connection (Physical Dimension) | 3-1/16"od |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 2" |
| Discharge Style | Side |
| Discharge Connection (Physical Dimension) | 3-1/16"od |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 2" |
| Horsepower | 2.5hp |
| Motor Frame | 48 Frame Thru-Bolt |
| Motor Amperage/Wattage | 10.7A/3.2A |
| Manufacturer | AquaFlo/Gecko |
| Pump Model | Flo-Master XP2 |
| Manufacturer Impeller Number | Impeller and Seal Kit for this pump |
| Volute Fastening Type | 8 Screws |
| Volute/Sealplate Number |
92770705 |
