See the Informational videos here first. This Kit is a (1) 2" Dead End X 2" Slip X (6) 3/4" Barbs manifolds, (3) 2" Spigot/Street X 2" Slip X (6) 3/4" Barbs, (1) 2" Spigot/Street X 2" Slip X (4) 3/4" Barbs Manifold, Connect Barbs and Clamps, 4oz Blue Glue, 4oz Purple Primer with a Coupler Kit. The Kit consists of 28 Barbs with (5) Manifolds total with (4x6) 3/4" Barbs and (1x4) totaling 28 Outputs, (3) 3/4" Plugs to cut the manifolds down to 27, 26 or 25 outputs, a 2" Coupler, 6" of 2" Soft Pipe, (56) 3/4" Clamps, 4oz Blue Glue, 4oz Purple Primer and 84" of Clear 3/4" Tubing so you have about 3" per extension. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side.
672-7170 , 806105121288 , 672-7170,55-270-1557,0364-20,5549-2,55-395-1020,672-7140 , 9405-35 , 806105121257 , 672-7140,55-270-2285,806105119711 , 672-4160,55-270-2257,WM2XSKB-4,55-174-2320,806105121226,672-7110,WM2XSP-4,55-174-2310,672-7120,55-270-2165,9348-16 , 806105121264 ,672-7150,55-270-2290,672-7150 , 806105121264 ,9348-16,WM2XSP-6,55-174-2300,672-4150,806105119711,55-270-2257, 55-395-1000,0367-20,21130-020-100,21130-420-100,21130-520-100,21027-200-100,21027-000-100,21027-100-100,21134-440-000,21134-340-000,21024-000-100,21024-100-100,21025-000-100,21025-000-100,21130-220,21130-320,21130-120,21027-300,21027-040,21027-120-100,21027-340,21025-100,21025-060,21025-260,barbed, smooth, ¾”, ¾” barb, .75, ribbed barb,rib barb,21090-100,55-270-1519,806105349996 ,715-0040
