This Catalina Filter is a 40 Square Foot Filter Cartridge that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter of the threads. SAE Threads are really thick...

Arctic Spas Curved Heater Kit that includes plastic parts to convert the heater to the original curved shape.. Stainless steel replacement flow thru, curved heater assembly with bare cord, and a 5.5kW/230v element. This is an aftermarket heater made for...

This item is a Replacement Waterfall Control 2 1/2" White Cap for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This cap measures about 2 1/2" Edge to Edge and the center hole is about 1"..  For the Threaded Cap...

This item is a Replacement Waterfall Control 2 1/2" Gray Knob for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This Knob measures about 3 1/8" Edge to Edge and the center Square hole is about 1/2"..  For the...

This part is a Complete Jet Internal, Waterway, Poly Jet, Caged Straight, Gray, 2" Face Width.. This Jet is similar to the Poly Jets with the face that slips in and out except it has no face just a body..  Jet Part...

Jet Internal, Pentair, Cyclone Luxury, 4-1/8" face diameter, Pulse Nozzle, LS,, Textured, Gray This smiley face cut out in the back of the diffuser is a tell tale sign that your jet is a Cyclone Luxury Jet.. Installation Type Twist...

Vico Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico. Rated at 1.5hp,which would be 8-9.0 Amps.. it is used in an Ultimax pump wet end, and must be installed on a 1.5hp (or greater) thru bolt motor.  Click here for...

This part is a Threaded Poly Storm Jet Body with a 3/4" Barb.. You would seal this with Silicon along with a gasket.. Hole size is about 2 5/8"  This part is a replacement for an obsolete Jet body but you will have to replace the jet as well to...

This part is a Slice, Gate Valve, Waterway, 2-1/2" Slip x 2-1/2" Spigot, Coast Spas and Others... The OD of the Street Spigot side measures about 2 7/8" and the ID of the Slip side measures about 2 7/8"..   This is a very unusual valve and an odd...

This tool can be used to crimp amp pins, strip wires, crimp other solderless connectors and crimp caps as well as wire cutting..   Tool Type Group Electrical Tool Type Crimping, Amp Tool...

This part is a 5 pin female side Amp connector 20 Amp . This part is normally found on the control pack side mounted for the male amp cord that would come from a pump or blower or other accessory. Note: You will need a pin tool to replace this part to...

This part is the Control Box Board Side Female AMP Connector that houses (2) Female Pins.. The Pins are not included.. This connector is used often on light cables.. Terminal Type AMP Terminal Style AMP Plug Housing Female Number of...