This parts is a Complete Jet Internal, American Products, Luxury, 3-1/2" face diameter, Roto, Textured Scalloped, White.. Installation Type Snap In Face Diameter 3-1/2" Jet Part Type Internal Diffuser Opening Type 5 Nozzle...

This part is a (1) 3/4" X 1" Barbed Coupler that fits 1" OD , 3/4" ID Clear Hose on one side and 1 1/4" OD , 1" ID on the other side. These are used for connecting Clear Hoses together in Hot Tubs or pools. Barb Fitting Type Barb...

Barb Adapter 3/8" Barb x 1/2" Spigot , The Glue Side glues inside a 1/2" Fitting which would measure 3/4" and a 3/8" ID tube would be glued over the barb.

This item is a 1/4" Air Bleeder Plug with coarse threads that can be found on the old style of a StaRite Dura-Jet DJ Series Wetends only. The head of this plug will break off and leave the threads in the wet end face. You can take a flat screw driver and...

This part is a New Style Adjustable Mini Jet 5/16" Nozzle Insert made by Waterway only the face not included. This Nozzle fits behind a Waterway new style cage back neck jet with the 4 prongs and the cage. These jets are removed by prying the Jet face...

This part is a New Style Adjustable 1/4" Mini Jet Nozzle Insert made by Waterway only the face not included. This Nozzle fits behind a Waterway new style cage back neck jet with the 4 prongs and the cage. These jets are removed by prying the Jet face out...

Grundfos Circulating Pump 230V with 1" Barbs... In my opinion this is a better pump than the Laing Brand... Spa Guy Note: If you are using this pump to convert from a Laing you will need this Conversion Kit If you want the same kit but need Glue Click...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 4 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps, but Waterway considers this a 4 HP. This unit features a 2" X 2" Executive Wet End that can be...

This part is a (1) 45¡ 2" Slip X 2"Slip PVC Plumbing Fitting. The 45 ELL receives a 2" fitting on each side which would measure 2 3/8". Any 2" fitting (which measures 2 3/8" outside diameter) will glue into this fitting on both sides to make a...

This part is a 2" Slip Cap 2 3/8" ID glue surface. This cap will glue onto a 2" Fitting which measures 2 3/8" OD.   PVC Pipe Fitting Type Cap First Plumbing Connection Size 2" First Plumbing Connection Type Slip (s)  

This item is a Plug that glues into 2" Slip fittings like manifold ends or tees to plug off the outlet. These fittings would measure 2 3/8" ID and this plug measures 2 3/8" OD.

This part is a 2" Street X 2" Slip X (2) 3/4" Barbs manifold and a single barb plug in case you only need 1 barbs instead of 2. The Manifold receives a 2" pipe on the slip side which would measure about 2 3/8" Outside...