This part is a Start Capacitor 108-130 mfd..1-7/16" diameter x 2-3/4" height Capacitor Type Motor Start Motor Brand A.O.Smith/Regal Beloit, Century/Regal Beloit, Franklin Electric, General Electric Microfarad Rating 108-130...

Valterra Pneumatic Activated and Cable Activated Gate ValveAvailable in a variety of sizes and configurations. Body material is black abs plastic and seals are made of santoprene material. Paddles may be plastic or stainless steel

This is a 1.5HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 1.5HP Motor that has about 9.0 Amps on High Speed at 230V and 14.0 Amps at 115V. This Impeller fits between the Face and the Volute of...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

This part is a Gray Notched 3 3/4" Spa Diverter Cap only.  This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the Diverter Valve with...

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater This Part is a Single Jumper Strap for a Balboa, EL, VS, GL or GS, Heater to Board connection.. This part is made from Copper.. Measures...

This part is a 90, Street Ell,  Elbow, 1" Slip x 1" Street/Spigot.. This part accepts a 1" Pipe or fitting on the slip side that would measure about 1 1/4" Outside Diameter and glues inside of a 1" fitting on the other side that would measure about...

This part is a Complete Jet Internal, Pentair, Cyclone Euro, 2" face diameter, Directional, 5 Scallop, Gray... Note: This is a Pentair Cyclone Euro Jet.. They do not offer a replacement diffuser for this jat and although it looks very much like a...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation, see pic 2. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2...

This is a 2.5HP Impeller with a 2 1/8" Eye width and 5/16" Vane width and 4" OD for anAqua-Flo 48 or 56 Frame Wet End 2.5HP Motor that is about 11.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet...