This part is a 90 Sweep Ell 1 1/2" Street X 1 1/2"Slip PVC Plumbing Fitting. The 90 Sweep ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the other side that would measure 1 7/8" ID...

This Part is a Wall Fitting Gasket used on Pentair Luxury Micro Jet Body Flanges between the flange and the color side of the hot tub shell.. You use silicon to seal the underside of the shell on the jet body side.. Note: Do not get the silicon on the...

This part is a Basket for a Filter housing mounted in a hot tub shell, It is made by Rainbow/Pentair and is Gray in color..  There are tabs on each side at the top that hold a weir in place and they will break off allowing the weir to float...

Poly Jet Wall Fitting Gasket

Reducer, 2" Spigot or Street x 1" Slip This part is used by gluing it into a 2" fitting which would measure about 2 3/8" Inside Diameter and then you could glue 1" Pipe or fitting inside of the 1" Slip fitting which would measure about 1 1/4" Outside...

This part is an Air Switch, Tecmark, TBS 339, SPNO, 25 Amp, Threaded, Latching.. Wire connects are 5/16" male quick connect Spade Type tabs and required panel hole is 5/8"..25 AmpSingle Pole Normally OpenLatching Style Switch Note: The Nut Style can vary...

This part is a Basket, Skimmer, OEM, Waterway, Flo-Pro Style, 3 1/4" Tall, 6 3/8" Wide.. Basket Type Skimmer Application Manufacturer Waterway Application Model Flo-Pro Basket Height 3-1/4" Bottom Outside Dimension 5-1/4" Top Inside...

This part is a 2" Slip X Dead End X (6) 3/4" Barbs manifold and a single barb plug in case you only need 5 barbs instead of 6. The Manifold receives a 2" pipe on one side and then is a Dead End on the other...

Jet Internal, Balboa Water Group/Pentair Luxury Mirco. Silver, 2-1/2" Textured Scalloped face, with Roto style internal. Available in additional colors and styles. Installation Type Snap In Face Diameter 2-1/2" Jet Part...

3/4" Water X 1/2" Air This complete Jacuzzi BMH jet includes a plumbing kit. The plumbing kit includes: 1" x 3/4" 90° reducer 1-1/2" x 1-1/2" x 3/4" tee 3/4" 90° 3/4" tee 3/4" street 90° 3/4" 45° 1/2" street 90° 1/2"...