Note: When you order this pump you will receive the newest version of this pump which is a baseless style and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not...

Wall Fitting , Pentair, Diverter Jet, 3-Port, Flange Below is a link to the parts that this flange fits.. Diverter Jet Internal, Pentair 3 Port Diverter, 4-5/8", Face Diameter, Directional, Gray Wall Fitting Gasket, BWG/Pent Diverter Jet, 3-Port,...

This part is a Jet Body that a Pentair, 3 Port, 4 5/8" Jet fits.. The Diverter Jet Body features (3) Water connections opposite each other that are 2" Slip X 2" Slip X 2" Slip, and a 1" Air Slip connection on the bottom of the body.. You will need...

This pump is a Replacement for a Laing or a New Style Grundfos Circulating Pump 230V with 3/4" Barbs found in many Jacuzzi® and Sundance® Hot Tubs... In my opinion this is a better pump than the Laing Brand... Spa...

Jacuzzi Spa Skimmer Shield Grate , J-200/J-300, 2002-2013  and here is a link to the filter for this tub too Jacuzzi Premium 2002+ Filter  Here is a link to the mesh bag that attached to the back of this door:Jacuzzi Premium Trap, Debri...

6540-828 JACUZZI® Spa Check Valve, 1 Inch Slip X Slip, 1/2 LB Spring.

This heater is the exact generic replacement for the original Watkins No Fault 4000 HTP76228 heater...This model does not include a pressure switch. If you have a gray wire with a small white or red connector on it then you have a pressure switch which...

This part is a PUMP MOUNTING BRACKET FOR: 48 FRAME NPMM Pump, Jacuzzi / Sundance, Baseless, TheraFlo, . Note: This will Only Work in Jacuzzi and Sundance Hot Tubs that have a removable base and also use to rotate mote at a 45 degree angle.  DO NOT...

Hot Springs retro-fit light kit with white trim. This kit replaces the old style lens with a new and improved model with white trim. Can be used on most 1989-1999 models. The spa light is visible through the light lens located in the bench seat of the...

This pump is a Pump, Jacuzzi / Sundance, Baseless, TheraFlo, 48FR, 1.5HP, 2SP, 115V that measures about 3" across the threads.. The amperage is 13.6 Amps on high speed and 3.6 Amps on low speed and this pump will work as a one or speed pump.. Note: This...

This part is a Direct replacement sensor kit for Watkins No-Fault 4000 or 6000 heater.Includes: Temperature Sensor, Hi-Limit Sensor, and (2) Two rubber O-Rings with newer Style Connectors 2002+.  Sensor Application Spa Control Sensor...

This part is a (1) American Products Luxury Jet Body Flange Tool. This Flange that this tools fits has two holes on the front that this tool fits into and the holes are between 2 1/2 and 2 5/8" apart.. The flange fits though a a 2 5/8" Hole in the shell...