This part is a Wear Ring that only fits Guangdong LX or LP Impellers for a 48 or 56 Frame Pump Wet Ends and measures 3/4" thick from front to back... WUA Pumps.. Note: When Replacing some original LX Pump faces the wear ring was built into the face....

This Part is a  Cal Spa 1" Spa Hot Tub Complete Air Valve "Teardrop Style". The Valve Tear Drop Cap Width is approx. 3" and the Hole size in the tube would be 1 5/8" with a 1" slip plumbing commention on the bottom..   For help please see our...

This O-Ring is a replacement for the Square Gasket that is found in the Sundance, Jacuzzi, Thera-Max, Thera-Flo, 2" Flat Style O-Ring..  Heater Union Part Type    O-RingPart Type    O-RingO Reference Number  ...

You are buying a Cal Spa 7000 or 9000 Heater M7 foam type Sensor. This Sensor comes with the wire, Connector, and The foam sensor. It DOES NOT include the tube, the tube side mount or the pull ties. When this sensor is bad it will generally cause a SN...

This part is a Sundance or Jacuzzi Hi Limit with the smaller bulb for 400, 600, 600-S, 750, 95+ with Bypass Heater... LED Hi Limit Sensor for Jacuzzi Hot Tub models J-235, J-245, J-275, and J-280. Fits all Jacuzzi J-200 Series Hot Tubs from 2011 to...

This part is a Volute O-Ring, 5" ID, 3/32" Thick, Vico Ultima Series, 48 or 56 Frame...

This pump is a Rare Sta-Rite / Balboa Dura-Jet 2'X 2" Side Discharge 48Fr 230V 2.5HP Pump Complete.. This spa pump has 2" union connections that will measure 3" across the male threads. Many of the motors used with these pumps are marked with a frame...

You are buying a Pressure Switch RP2100 with Plastic Header that fits a Raypak Gas Heater System, 105B, 185, 130A, 207A, R185A, 1.75psi..  PRESSURE SWITCH IS A BARKSDALE (THE LITTLE GENERAL) SWITCH # MSPS-EE05-Q71 .5-5.0 PSI (8 MAX) MAX...

You are buying on a 2" Slip X 2" Barb Adapter.. This adapter glues inside of a 2" PVC plumbing fitting and a 2" Inside Diameter Tube glues onto the barb..  This part is found in Strong Spas and some others I will list them as I find out...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation, see pic 2. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2...

This New Old Stock part is a Complete Hot Tub Spa Part Gray 8" Aqua Fall Waterfall Assembly with Screws and a 3/4" slip water connection.. This can be a replacement part for an old waterfall or a new install.. If newly installing it will require some...

This part is a Complete Jet Body, CMP, Typhoon 300, 2-3/16" Hole Size,  Air 3/8" barb, Water 3/4" barb... Note: This brand of jet body is obsolete but we ship a version that will work on place of it and fit your CMP Typhoon 300 Jet..  Hole...