This part is no longer available, but we do have a replacement here: Hydroquip / Gecko ECO-1 Crescent Shaped 4 Button Topside Control Panel   This part is a Eco Series Hydro-Quip, Eco 5, 4 Button, (1) Pump, Light, Aux, Small Rectangle, 10ft...

This part is a 9" Fat Graphite Single Pin pillow with the number 25702-247 in the back of it.. This pillow fits Hydro Spa, Premium Leisure and Platinum Legend and Others. It is 9" long and  It is Graphite in color.  

This part is a Balboa E4 4 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.        The button configuration of Blower, Jet, Temp and Light left to right. This Overlay can be used to replace your original...

This is a 3HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo XP2 Impeller...

This is a 2.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct...

This is a 2.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct...

This item is a Black Handle used on a Waterway Waterfall or Neck Jet control only.. Note: this looks similar to an Air Control Handle but they are different.. The main thing is the Square part that slides on the valves stem it is about...

This part is a Complete Jet Body for Waterway Power Storm 5" Face Snap In Style Jets... This Jet Body features a water connection of a 3/4" Barb and an Air Connection of a 3/8" Barb.. NOTE: This part has been discontinued by Waterway so stock is...

These have been being obsolete but they are back in production and we are expecting some in the May of 2019.. If you go ahead and order yours will be shipped as soon as they come in.. Watkins Replacement Element Old Style for HotSpring come with...

This is a 3HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo...

This is a 3HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo...

This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...