This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 3.0HP impeller which would fit a motor that has 10.0-12.0 amps at 230V and there are no 115V motors this fits.. Pump to Motor...

This part is a Tee that is 2"Slip x 2" Slip x 3/4" FPT.. This part is usually found in plumbing with spigot screwed into it.. Note there are 2 Spigot sizes 3/4" and 1/2" Threaded..   If you need a spigot that threads into this tee click this...

This part is a Sta-Rite Dura-Jet Complete 2" X 2" Wet End that fits both 48 or 56 frame motors and would fit a 230V Pump that is 8.0 Amps or a 115V pump that is 12.0 Amps.. The 2" fitting actually measures about 3" Edge to Edge across the threads.. It...

This pump is a Complete 3.0HP Hi-Flo Side Discharge 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Sometimes marked as 4.5 SPL which is the...

This part is a Balboa Circuit board for an EL2000 Mach 3 system it is a new board and can be found under several different numbers.. The compatible topside would be a MOLEX system plug not a phone plug..THIS BOARD INSTALLS IN A PLASTIC BOX and Will not...

This part is a 4 Button, VL401 LCD Topside, E4, Balboa, Lite Duplex Digital, (1) Pump (1) Blower, Temp, Light... This topside control is made for use on Balboa VS500Z, VS501Z systems. It will also work on Hydro-Quip Platinum Series 6501B and 6502B...

This part is a 4 Button, ECO401 LCD Topside, E4, Balboa, Lite Duplex Digital, (1) Pump (1) Blower, Temp, Light... This Topside is used with Valve, SUV, VS500, VS501 and more systems.. The required hole size is about 2 1/4"x 6 3/8"....

Balboa Water GroupStainless steel replacement heater assembly, 5.5kW/230v, 2" x 15". Includes a pressure switch, Hi Limit Sensor on the right side. Made for Balboa Value and Balboa LE control systems. Housing Configuration  ...

This part is a 3/4" Barb x 3/4" x 3/4" Barbed Tee used to couple 3/4" ID Tubing together. Other Parts Normally used with this part: Tubing 3/4" Inside Diameter 1" OD (1) Foot Used on Water Manifolds and More (2) Feet of Tubing 3/4" Inside Diameter...

This part is a 3/4" Barb x 3/8" x 3/4" Barbed Tee used to couple 3/4" ID and 3/8" ID Tubing together. Other Parts Normally used with this part: Tubing 3/4" Inside Diameter 1" OD (1) Foot Used on Water Manifolds and More (2) Feet of Tubing 3/4"...

This part is a 2" Center to Center O-Ring that fits some 1 1/2" Pump Unions that features a 2" groove. The O-Ring is 2" center to center and fits Magic Plastics 2" pump unions but there are exceptions which normally would be a 2 1/8" center to...

Due to shortages with this pump model we may send this out with a separate motor and wetend that you assemble on site. Its very easy to do and we are happy to help if needed.    This pump is a Rare Sta-Rite Dura-Jet 2'X 2" Side Discharge 56Fr...