This part is a Complete Cal Spa Peanut topside control panel...Button Pattern: Temp, Light, Jets, Option8 Pin 7' phone style connector4-1/2" x 9-3/4" Overall Size   4 Button, LED Display w/7' Cord Overlay Included - Yes Plug Type - 8...

Gasket Only for a CMP Typhoon 500 Jet Body For Gasket is for a Jet Body thats fits these jets Click this Link: Typhoon 500 Jets         Part Type Gasket Jet Part Type Gasket/O-Ring Manufacturer Custom Molded...

This is a Universal Low Flow Spa replacement heater that can be used in place of any Low Flow with the included kit or in some cases a little bit of additional tubing and fittings will be needed to complete the retrofit: Vertical Low Flow Canister...

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

Applied Computer ControlsStainless steel flo-thru replacement heater assembly. Measures 12-1/2" x 2" and has (2) mounting studs, pressure switch tap at 0 degrees from the heater terminals, external thermowell and a 5.5kW element. Commonly found on the...

This pump is a Aqua-Flo 1019801 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump..   If you...

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a LX Pump Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 on the label. It is about 7 1/4"" across the face of the pump, it measures...

This part is a (1) 90 Ell 1 1/2" Street X 1 1/2"Slip with an 3/8" FPT hole in the side.. The 90 ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the other side that would measure 1 7/8" ID on...

This is a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo Wet Ends...

This part is a Bypass Valve Flap made by Waterway found inside of In-Line, Top Load, Top Mount, Front Access, 2" Filter Housings... You will find these in several colors and they will have the numbers 602-5101 or 601-5111 on the valve in most cases....

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Vendor Code 3536 LX Pump Wet End.