This part is a Hoss 2" Slip X Dead End X (7) 3/4" Barbs manifold and a single barb plug  The Manifold receives a 2" pipe on one side and then is a Dead End with (1) 3/4" Barb on the end with (6) 3/4" Barb...

This item is a 25' Roll of Flexible PVC Pipe 1" measures about 1 1/4" OD and 1" ID.. Pipe Type Flexible PVC Pipe Diameter 1" Pipe Length 25ft

This part is a Hoss 2" Slip X 2" Slip Slice Gate Valve with Keeper. The Valve recieves a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on both sides. This part is used in hot tubs to stop the water so you could service the heater or the...

This part is a Boss Modern Style 1" Spa Hot Tub Air Valve. The Valve Cap Width is approx. 3" and the Hole in the Spa Shell is approx. 1 5/8".   This Valve is Universal and can be used in most Hot Tub Applications as a replacement...

This kit features an Updated Hoss Modern 2" Diverter valve with a locking ring in a Kit which Includes 4oz of Blue Glue and 4oz of Purple Primer and the Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2)...

This part is a Reducer, 1"spg x 3/4" Female Pipe Thread.. PVC Pipe Fitting Type Reducer First Plumbing Connection Size 1" First Plumbing Connection Type Spigot (spg) Second Plumbing Connection Size 3/4" Second Plumbing...

Universal Rite-Fit Gecko Series heater assembly, 2.25”x 15”, 304SS, multiple PSI taps, adjustable cover plate, and adjustable studs. Includes 2”x2” tail pieces 2” ridged gaskets.   This heater will...

This kit fit 39583-03 Vendor Code 3536 1.5HP Impeller, Seal, Silicon and Seal Installation Tool that fits 48 Frame Pump Wet Ends manufactured by Intertek LX Brand only.  NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do...

This part is a Balboa 6 Button Overlay for a VL620S or VL600 Topside with Two Pumps and Light System. On the overlay starting at the left of the readout it reads Jets, Aux, Light and to the right is Warm, Mode, Cool. This Overlay has an Adhesive back you...

This part is a Balboa 6 Button Overlay for a Topside for a Pump and Blower with Light System. On the overlay starting at the left of the readout it reads Jets, Blower, Light and Warm, Mode, Cool. This Overlay has an Adhesive back you simply clean the old...

This part is a bare Balboa 6 Button VL620 Topside for a Two Pump system with Light System. The VL620S topside control measures 7" x 3-7/16" and has a 7 foot cable with a phone jack style RJ45 plug. The overlay sticker for this topside control panel is...

This part is a 33-0612-08 replacement circuit board that operates (2) Jet pumps or (1) Pump and Blower, Light and a Circulation Pump if equipped on some Artesian or South Seas Hot Tubs.. As of 2024 new VS501 circuit boards will come with the plug and...