This part is a 1 1/2" MPT Threaded plug that is used in Swimming Pools to block off the 1 1/2" Threaded returns when winterizing to stop water from being in the plumbing system and used on some Sand or De Hayward filter systems. You would simply unscrew...

This part is a 2 1/2" Heater Split Nut which measures 3 9/16" Inside Diameter of the threads and 3" inside the ceneter part that wraps around a heater tube or body. The Heater Flange Split Nut mounts to the heater tube using 2 screws to hold it in place...

This part is a 2" Slip X 2" Slip X (6) 1/2" Ports Manifold open style. This part used in tubs where 1/2" softpipe which measures 3/4" OD glues inside the ports and goes to the back of each jet in the tub and 2" Pipe which is 2 3/8" OD is plumb into 2"...

This is a 1/2" Spigot Plug which measures 3/4" OD it is used to plug off a 1/2" port which measures 3/4" ID on a manifold or other fittings. Note: The style of this part can vary but they will all act as a 1/2" Plug.. 

This Item is a 20Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/4" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass but used ceramic to dissipate heat. You will not be...

This part is a Complete Jet Internal, American Products, Luxury, 3-1/2" face diameter, Roto, Textured Scallop, Gray... Installation Type Snap In Face Diameter 3-1/2" Jet Part Type Internal Diffuser Opening Type 5 Nozzle...

This part is a Spinner Nozzle that is used in a HydroAir Duo Jet Series Jet. This jet has other parts the can be found in the below links and are sold separately: Retaining Ring, HydroAir, Duo Blaster, Roto, Gray, For 1 3/4" Face Flow Path, HydroAir, Duo...

"Magicmend" Extender FittingFits over the outside 1.5" fitting and allows a new 2" spigot or 1.5" slip connection. PVC Pipe Fitting Type Extender, Outside Fitting Plumbing Repair Fitting Type Extender, Outside Fitting Pvc Pipe Size "A" 1-1/2" Plumbing...

This part is a Jacuzzi® J Pump Style Pump Union that can be used on 1 1/2" or 2" Plumbing systems. This union can receive a 1 1/2" plumbing part inside the back of the union or a 2" Plumbing part glued to the outside of the...

This is a Balboa Temperature & Hi Limit Combination. This is a standard part and fits most Balboa 4 pin applications that are no M-7. It features a 4 pin connector will Curley Finger style ends and the Temperature Sensor Cable is 96" long and the Hi...

Spa or Small Pool Floating Dispenser (1" tabs) Floating Feeder Complete Complete Floating Feeder Tablet Size 1 inch Color Blue Manufacturer Rainbow/Pentair

This part is a Run Capacitor that fits many 230V Pump Motors. When diagnosing pumps for a run capacitor concern you will find high amp draw, overheating, Noise and other concerns. This type of capacitor is really hard to dioagnose unless it is not...