This 230V Laing E-10 pump with a 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diamater  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed...

Adjustable Cluster Jet InternalsDiscontinued; availability limited to stock on hand

This O-Ring is found in Waterway Inline Chlorinators on the Control Valve Stem. Application - Category Chlorinator Application Manufacturer Waterway Application Model Inline (2002-2007) Application - Part Control Valve Stem Manufacturer Part Number...

This part is a Complete Jet Internal, Pentair, Cyclone Micro, 3" face diameter, Roto, Textured, Scallop, Gray...   Installation Type Twist Lock Face Diameter 3" Jet Part Type Internal Diffuser Opening Type 2 Nozzle...

This part is a 1 1/2" MPT Threaded plug that is used in Swimming Pools to block off the 1 1/2" Threaded returns when winterizing to stop water from being in the plumbing system and used on some Sand or De Hayward filter systems. You would simply unscrew...

This item is a 2 1/8" wear ring that is used between the impeller and the wet end face on Aqua-Flo XP or XP2 Pumps. This wear ring is for all Horse Powers on 48 or 56 frame XP2 Wet Ends. This wear ring serves as a seal between the suction and pressure...

This item is a Chemical Dispenser Floater designed to dispense 1" Tabs, Chlorine or Bromine. Floating Feeder Complete Tablet Size 1 inch Color Tan Manufacturer Rainbow/Pentair

This is a 1.5HP Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet End...

This item is a slice valve stem lock keeper to stop 2" Magic Plastics Slice Gate Valves from vibrating shut. Note: This lock will not work on all brands of slice valves because the stem is different lengths on other brands but will work on most.

This part is a 4 pin female side Amp connector 20 Amp . This part is normally found on the control pack side mounted for the male amp cord that would come from a pump or blower or other accessory. Note: You will need a pin tool to replace this part to...