This fitting is a 90 degree glue in style spigot x barb. The Spigot side will glue into a 1" fitting that measures about 1 1/4" Inside Diameter and the barb accepts a 3/4" inside diameter hose usually a clear hose. These are usually used on water control...

This part is an O-Ring that is a square style.. It fits Piranha "A", Thera-Flo, Thera-Max, Bracketless, all found on Jacuzzi, Sundance, Hotspring and other brands as well...Part Type    Square RingO Reference Number  ...

Hi LimitsSingle pole rated at 25 amps with temperature rating set at 121°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater12" capillary length, 1/4" bulb thicknessThis is a safety...

Compact Lowprofile DesignInterchangeable metal and plastic trim partsHole size 1-1/4"

This item is a Inlet Fitting, 2-3/8" Hole Size, 1-1/2"fpt x 1-1/2"fpt, w/Gasket, Nut, Swimming Pool Wall Fitting.. Inlet/Return Application Fiberglass Inlet/Return Part Type Return Wall Fitting Wall Fitting Hole Size 2-3/8" Inlet...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 2 HP 2" X 2" Pump. Your sticker may say 3HP but based on the chart it is really a 2HP at 10 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position...

This Kit is an 5HP Impeller for an Executive 48 Frame Wet End up to 5HP Motor and a 56 Frame Wet End 5HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...

4-port manifold with (4) 3/8" barbs and 1" Slip x 1" Street inlet/outlet   Barb/Port Size 3/8" Barb Port Type Barb (b) Number of Ports 4 Manifold Fitting Type Flow-Thru Manifold Plumbing Size "A" 1" Manifold Plumbing Type "A" Slip (s),...

This part is a Drain Plug, Jacuzzi, Sundance, Piranha with O-Ring, quantity of 2.. This fits the Piranha style pump face only.. 

This pump s a 115V (2) Speed 13.3 Amp High Speed and 4.1Amp Low Speed 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall...