This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 56 frame XP2e 3.0HP 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about...

This kit is a (30) piece Clamp Kit that fits 1" OD , 3/4" ID Clear Hose ONLY. These are used for connecting Clear Hoses to many PVC Plumbing Parts in Hot Tubs. You can put these clamps with other parts we are offering in our store to make...

This part is a Manifold, 1/2" Slip, 6 Port, Transition, 2" Slip Barb/Port Size 1/2" Number of Ports 6 Manifold Fitting Type Transition Manifold Plumbing Size "A" 2" Manifold Plumbing Type "A" Slip (s)

This part is a Complete Jet Internal, American Products, Luxury, 3-1/2" face diameter, Directional, Hi-Flow, 5 Scallop, Gray.. Installation Type Snap In Face Diameter 3-1/2" Jet Part Type Internal Diffuser Opening Type 5 Nozzle...

ThermostatsSingle pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of...

This impeller fits a Universal CMP Brand 3HP Wet End only and it requires a Special Seal that you will find a link to below.. This impeller may also have any of the following manufacturer part numbers stamped on the back: 27203-300-300, 27203-000-300,...

This filter Fits some Dimension One and At Home Hot Tubs after 2000.. It is 10 1/2" Ta x 7 1/8" Wide has a closed top with castle tabs and features a butterfly type twist lock bottom where you slide it down over the butterfly hole in the filter housing...

This part is a Complete 2HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 10.0 Amps on High Speed on a 230V motor or 16.0...

This part is an Old Style Adjustable Mini Jet 1/4" Nozzle Insert made by Waterway only the face not included. This Nozzle fits behind a Waterway Old style back neck jet with the 4 prongs that fit into the Nozzle. These jets are removed by prying the...

This filter fits some Emerald Spas and some other brands as well.. This filter is 17 1/16" tall and 2 7/8" wide and has 1 1/16" holes in the top and bottom of the filter....  Diameter 2-7/8" Length 17-1/16" Top...