This item is a 50' roll of 1 1/2" Flexible PVC Pipe measures about 2 3/8" Outside Diameter.. Note: This could come in (2) rolls of 25'.. Pipe Type Flexible PVC Pipe Diameter 1-1/2" Pipe Length 50ft

SC Series Time Delay FuseIdeal for protection of loads subject to high short circuit currents. Protection to 60 amps

This part is a topside that is used on Balboa Heat Recovery Jacket systems found in many brands of Hot Tubs like Dreammaker... It features Warm, Cool, Jet and Light reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is...

This part is a Complete Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Roto, Deluxe Scalloped, Gray... This jet is threaded and the way you remove it is use a flat screw driver and carefully start pulling the edge of the face out on...

Slimline Silent Air ControlComplete Air Control AssemblyAvailable in 1" and 1/2" models. 90¼ min/max for vertical or horizontal applications1" assembly, hole size 1-3/4"

This Pump is a 48Frame 115V 2 Speed with a 1.5-2.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 13.3A and low speed is 4.1 Amps....

This part is a Complete Flo-Master FMCP 1HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High...

This Listing is for a (1) Speed Waterway Executive 56fr 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. Measure the intake and pressure side threads and match them up before ordering.  This...

This part is a Reducing Tee that is 2" Slip x 1/2" Female Pipe Thread x 2" Slip... The 2" Sides receive pipe and fittings that would measures about 2 3/8" OD on each end and a 1/2" Threaded fitting that would measure about 5/8" OD like a spigot or other...