This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 2.0HP impeller which would fit a motor that has 10.0 amps at 230V and 16.0 amps at 115V.. Pump to Motor Foot Types  ...

You are buying a 5 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will...

This part is a 48Frame Center Discharge 1 1/2 x 1 1/2" 1HP Waterway Wet End.. The threads would measure about 2 3/8" Edge to Edge.. This wet end would be found on a 115V motor with an Amperage of about 12 Amps or a 230V motor with an Amperage rating of...

Ultra 9000Highly advanced and super quiet for portable spas. Intake manifold designed to eliminate small objects and debris from entering blower and causing failure. A 2" tapered slip fitting eliminates the need for glue or clamps. Standard with 4-pin...

This part is a Gate Valve, Unibody, Magic, 2-1/2"s x 2-1/2"spg, 80psi.. If you want a lock for this valve click this link to add the lock: 2 1/2" Gate Valve Lock Manufacturer Magic Plastics Gate Valve Complete Unibody Valve First Plumbing...

Nylon Test Plug-closedThese economical plugs use a nylon stem and wind nut. They maintain superior sealingproperties; great for winterizing. Straight sides allow full insertion into the fitting rusultingin a maximum quality seal