This kit is (1) American Products Luxury Jet Body with a 3/4" slip water fitting and a 3/8" barbed air fitting the kit includes the Flange with Silicon to Install as well. This Jet Body & Flange that fits a 2 5/8" Hole can be found on may...

Caldera/Watkins replacement 4.0kw 230v Low Flow Trombone Heater. 26" x 6" dual element w/24" pigtail cord & off angle box w 3/4" barbs & pressure switch cable. This heater is used with a low flow circulation pump like the Laing and SilentFlo...

In this video The Spa Guy shows you How To Read and understand a Hot Tub Pump Motor Wiring Schematic and wire your Hot Tub Pump motor.. Most Hot Tub Pump Motors do not come with a wire so this teaches you how to put the wire on the new motor.....

This video is about The Spa Guy teaching you How To Turn a Pump Wet End to the Direction You Need it to be in to fit your hot tub... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save

This part is a Pillow, Covervalet, Waterbrick Seat Cushion, Blue, Booster Seat it is 14" long 11" Wide x 5" Tall.. You fill it with Aquarium Rocks to keep it on the seat of the tub...   Provides added comfort for the spa...

This kit is (1) American Products Luxury Jet Body Flange with Small Tube of Silicon. This Flange that fits a 2 5/8" Hole can be found on may brands of Hot Tubs but the main brand I find them broken in is a La Spa. I have also seen them in Cal Spa ,...

This 1.0 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Watkins Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 37334-03 on the label for a Watkins Version.  It is about 7 1/4"" across the face of the pump,...

This is a 1.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor would be about 9.0 Amps on high speed at 230V or 14.0 Amps on High at 115V. Note: The three things you need to...

This is a 1.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor would be about 9.0 Amps on high speed at 230V or 14.0 Amps on High at 115V. Note: The three things you need to...

This is a 1.65HP Seal Kit & Impeller for Watkins, Vendor # 4081, Wavemaster Pumps. This Impeller fits between the Face and the Volute of a the Wet End found on some Watkins HotSpring Caldera pumps with Vendor Code 4081 with Numbers 06115734-1,...

  This is a 1.0HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps on High at 115V. Note: The three things you...

  This is a 1.0HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps on High at 115V. Note: The three things you...