You are buying a pillow that fits Sundance Pillow Chevron 880 SERIES WITH INSERT GRAY 2001-2004.  If you have suction cups this, pillow will not fit your tub.  Please see pics for measurements

This Kit is a 12' Long RADKit® designed to go onto the outside of a 2" fitting and seal off the area between (2) 2" Fittings Outside to Outside.. An example would be if you had a Suction fitting dripping at the glue joint and there is a piece of 2"...

This kit is a 6' Long RADKit® designed to go onto the outside of a 2" fitting and seal off the area between (2) 2" Fittings Outside to Outside.. An example would be if you had a Suction fitting dripping at the glue joint and there is a piece of 2"...

This filter is made specifically for Dream Maker Hot Tubs only and it is a 27 Square Foot Oval Shaped Filter Cartridge that is 6-1/4" Outside Diameter on the Widest Part of the Oval x 9-3/4" in Length. It has an Oval Hole in the top that measures about 4...

This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer..   This kit can be added if you...

This part is a 4 1/8" Wide Diverter Cap & Handle for a 2008+ Hot Spring, Caldera, Tiger River, Watkins Diverter Valve. This Kit comes with The Cap & Handle only. The Valve these parts fit can be found on Hot Spring, Caldera, Tiger River...

This part is a Long Stem Style Repair kit for a 4 1/8" Wide Spa Hot Spring Caldera Tiger River Watkins Diverter Valve. This Kit comes with The Cap, Handle, Stem and (2) Small O-Rings and (1) Large O-Ring. The Valve these parts fit can be found on...

This part is a Spa Waterfall or Neck Jet 1" Control (3) Or-ring Set which includes (1) Large & (2) Small O-Rings only. This 1" Diverter Control O-Ring Kit features (3) Oring/Gasket and is about 1 7/16" I.D. and the groove it fits into is about 1...

This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...

Jet Body, CMP Cluster, 1"hole size, air 3/8" barb x water 3/4" barb This is used with CMP Cluster Jets only Hole Size 1" Air Connection Size 3/8" Jet Part Type Body Air Connection Type Barb (b) Water Connection...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko MSPA Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets.I also offer the element only or the tub and element with no pressure switch...

This Kit is an ACC Smart Touch E-Pac LF with low flow heater Set Up. The heater on this unit isused with spas that have a low flow circulation pump such as a Laing or Grundfos pump. This unit will control a low flow circ pump, 2 speed primary pump, a...