Grundfos Circulating Pump 230V with 1" Barbs... In my opinion this is a better pump than the Laing Brand... Spa Guy Note: If you are using this pump to convert from a Laing you will need this Conversion Kit If you want the same kit but need Glue Click...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...

This part is a (1) 45¡ 2" Slip X 2"Slip PVC Plumbing Fitting. The 45 ELL receives a 2" fitting on each side which would measure 2 3/8". Any 2" fitting (which measures 2 3/8" outside diameter) will glue into this fitting on both sides to make a...

This part is a 2" Slip Cap 2 3/8" ID glue surface. This cap will glue onto a 2" Fitting which measures 2 3/8" OD.   PVC Pipe Fitting Type Cap First Plumbing Connection Size 2" First Plumbing Connection Type Slip (s)  

This item is a Plug that glues into 2" Slip fittings like manifold ends or tees to plug off the outlet. These fittings would measure 2 3/8" ID and this plug measures 2 3/8" OD.

This part is a 2" Street X 2" Slip X (2) 3/4" Barbs manifold and a single barb plug in case you only need 1 barbs instead of 2. The Manifold receives a 2" pipe on the slip side which would measure about 2 3/8" Outside...

This is a back mount pressure gauge with a 1/4" MPT Threaded Mount used on Swimming Pool and Inground Style Hot Tub Sand and DE Style Filters. Hayward, Pentair, StaRite, Purex,Jacuzzi,Pacfab, Filter Gauge Type Pressure Mounting Type Back Mount Connection...

This part is a Starter Capacitor that fits many 115V Pump Motors. Start Capacitor, 161-193 MFD, 115v, 1-7/16" x 2-3/4" When diagnosing pumps for a no start condition where it is powered up but just hums you can hand spin start the motor by taking a screw...

This part is a (1) 90° 2" Slip X 2"Slip PVC Plumbing Fitting. The 90° ELL receives a 2" fitting on each side which would measure 2 3/8" Inside Diameter. Any 2"  fitting (which measures 2 3/8" outside diameter) will glue into this...

Large 4oz tube is the ideal size for the service professional's truck or repair bench! Stock a few extra as a backup! Lube Tube lubricates and seals with a patented barrier of PFTE. It's unique formula containing silicon dioxide eliminates the need for...

This part is a 2" Slip X 2" Slip X (4) 3/4" Ports Manifold open style. This part used in tubs where 3/4" softpipe which measures 1" OD glues inside the ports and goes to the back of each jet in the tub and is plumbed into 2" Pipe which measures 2 3/8" OD...

You are buying on a 25Amp Pressure Switch Universal Kit that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections and Some Brass Adapters to change the 1/8"mpt connector over to an 1/8" Barb or to a compression...