Pumps and Related Parts

This is a Waterway Tiny Might Circulation Pump that is 1" x 1" which measures about 1 7/8" to the outside of the threads. It is high in efficiency and low on power use. Tiny Might packs a not-so-tiny punch. The Tiny Might offers you a great low flow...

Pump Union – 1-1/2" FBT x 1-1/2" FPT This durable pump union is designed for a secure and reliable connection between your hot tub pump and plumbing. Featuring a 1-1/2" Female Buttress Thread (FBT) on one side (measuring...

This is a XP2e 1.5HP Impeller.. The Impeller has a 2 5/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor would be about 9.0 Amps on high speed at 230V or 14.0 Amps on High at 115V. See the links below for seals, bearing and other parts...

This part is a Pump Union, 2" Female Buttress Thread x 1-1/2" Slip..    Half Union Fitting Complete Complete Pump Union Union Fitting Application Pump First Plumbing Connection Size 1-1/2", 2" First Plumbing Connection Type Female...

Vico/Balboa Ultima/Ultra Flo Pump ImpellerClosed face impeller made for the Ultima and Ultra Flo spa pumps by Vico/Balboa. Rated at 3/4hp, it is used in an Ultima and/or Ultra Flo pump wet end, and must be installed on a 3/4hp (or greater) thru bolt...

This Listing is for a (1) Speed Waterway Executive 56fr 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. Measure the intake and pressure side threads and match them up before ordering.  This...

This part is an Impeller for a Sta-Rite DuraJet DJ Wet End that would be called 1.0hp-1.5HP, your motor should be 8.0-9.0Amp at 230V or 16.0 Amps at 115V.. The number on the back of the impeller will be 17400-0021 or 17400-0121 if you have a number on...

This complete pump is a Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2"...Spa Pump Features:Executive wet end designed specifically for 48-frame motorsLarge 6-1/2" diameter wet end for higher head pressure2" intake and dischargeWet end can be rotated...

Balboa / Sta-Rite Dura-Jet wetend in 3HP. Also known as the DJ this high flow side discharge wetend can be mounted to 48 or 56 frame motors. This side discharge model has 2" unions that will measure 3" across the male threads. The barb fittings on this...

This part is a Complete XP2e 6.3” 2.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 56 frame wet end for XP2e pumps. This wet end is used with a 56 frame motor that would have about 11.0 Amps on High Speed on a...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...

This Kit is an 1HP Impeller for an Executive 48 Frame Wet End up to 1HP Motor and a 56 Frame Wet End 1HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...