This part is aTop Draw Style Air Control with a Smooth White Top that measures about 2" wide it requires a 1 1/8" wide hole in the tub to be mounted and accepts a 1/2" slip pipe or fitting in the bottom.   There is a similar version of this...

This part is an Air Injector Jet Body 3/8" Barb Accepts 3/4" Thread in Injector Part with 1 1/4" Face. This Part is installed by adding clear silicon to the flange and screwing the flange into the jet body using an allen wrench. . This Air Jet...

This part is a Electronic Pressure Switch for Watkins Solana, Caldera & Hot Spot, 2006 Thru Current that features 1/8th" MPT Standard Threads and 2 pin connectors for attaching the 2 wire 3 hole connector for a Watkins Hawk board. What goes wrong...

This part is a Complete CMHP 1/15th HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for CMHP pumps. This wet end is used with a 48 frame motor that would have about .6 Amps on High Speed on a...

See the Informational videos here first. This kit is a 2" X 2" Slip X Dead End X (4) 3/4" Barbs + 2" Street x Slip x (6) 3/4" Barb Manifold Deluxe Replacement Kit. The Kit consists of (2) Manifolds total one with (6) 3/4" Barbs and...

See the Informational videos here first. This kit is a 2" X 2" Spigot X Dead End X (6) 3/4" Barbs + 2" Street x Slip x (2) 3/4" Barb Manifold Deluxe Replacement Kit. The Kit consists of (2) Manifolds total (2) one with (6) 3/4" Barbs...

See the Informational videos here first. This kit is a 2" X 2" Slip X Dead End X (4) 3/4" Barbs + 2" Street x Slip x (4) 3/4" Barb Manifold Deluxe Replacement Kit which included 4oz of Hot Blue Glue and 4oz of Purple Primer. The Kit...

Balboa / Vico Ultima spa pump in 1.0 -1.5 HP, 115 Volts. Older models may be marked with the Ultra Jet name or with teh uprated 2.0 horsepower. This side discharge pump has 2" unions that measure 3" across the threads and has 3/8" barbs built into the...

This item is Insparation Hot Tub Fragrance 9oz Bottle Spa & Bath Liquids in 12 different fragrances.. The Fragrance Options we offer are: Coconut Mango, Cucumber Melon, Eucalyptus Mint, Hawaiian Sunset, Heavenly Honeysuckle, Jasmine,...

This Parts is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you...

This O-Ring is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you...

This item is a 1/8" MPT Plastic Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole...