Pump Wet Ends and Related Parts

This Seal Set is used ONLY in Watkins HotSpring Caldera Wet Ends where the motor has the Vendor code of 3536. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that goes...

This part is a Front and Back Volute for a Vico, Ultimax, 2" X 2", 48 or 56fr motor.. This part will fit both 48 and 56 frame motors and does not come with any other accessories like the seal, bolts or impeller.. For other parts click this link for this...

NOTE: This Seal will NOT Fit Sundance® or Jacuzzi® Tubs with a LX Guangdong Wet End for those parts click here Jacuzzi® & Sundance® LX Parts This Swim Spa Pump part is a Swim 56 Seal Kit that includes the...

This 5.0 Horse Power Swim 56 Impeller fits 56 Frame Pump Wet Ends manufactured by Guangdong LX Brand only that have the WUA500 marking only. The pump this impeller fits usually have the part number Swim 56 on the label. This impeller will not fit the...

  NOTE: This Seal will NOT Fit Sundance® or Jacuzzi® Tubs with a Guangding LX Wet End for those parts click here Jacuzzi® & Sundance® LX Parts    This Seal Set is used ONLY in Guangdong...

This is a 3HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo XP2 Impeller...

This is a 2.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct...

This is a 2.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct...

This is a 3HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo...

This is a 3HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo...

Vico Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico. Rated at 1.5hp,which would be 8-9.0 Amps.. it is used in an Ultimax pump wet end, and must be installed on a 1.5hp (or greater) thru bolt motor.  Click here for...

This Kit is features a 5HP Impeller, (2) Standard Bearings and 1000 Seal with Silicon and a Seal Install Tool that fits an Executive 48 Frame Wet End up to 5HP Motor and a 56 Frame Wet End 5HP Motor. This Impeller fits between the...