Pumps and Related Parts

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 4.0HP I would call it a 3.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 3.0HP I would call it a 2.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

This part is a Pump Bleeder Barb fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

This complete pump and motor is an Aqua-Flo, 1431701-01, 115V (2) Speed 48 frame 2" x 2" pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall style...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit a Piranha, Vendor Code 0302, 1.65hp. To Install you should put silicone sealant on the back of the Metal part and gently push it into place. Also the rubber part can...

This pump is a Rare Sta-Rite Dura-Jet 2'X 2" Side Discharge 48Fr 115V 1.0HP Pump Complete.. Also known as the Cascades or DJ spa and hot tub pump assembly made by Balboa Water Group. This side discharge pump assembly provides great flow rates with a...

This Kit is a Set of (9) Replacement Gaskets Only (3) Gasket for the "A" Coupling and (6) for the "B/C" Couplings.. The "A" Gasket measures about 1 7/8" edge to edge overall and the lip or L shaped part measures about 1 9/16" Center to Center.. The...

This Kit is a Set of (6) Replacement Gaskets Only (2) Gasket for the "A" Coupling and (4) for the "B/C" Couplings.. The "A" Gasket measures about 1 7/8" edge to edge overall and the lip or L shaped part measures about 1 9/16" Center to Center.. The...

This Kit is a Set of (3) Replacement Gaskets Only (1) Gasket for the "A" Coupling and (2) for the "B/C" Couplings.. The "A" Gasket measures about 1 7/8" edge to edge overall and the lip or L shaped part measures about 1 9/16" Center to Center.. The...