Pumps and Related Parts

This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo FMHP, FMCP, FMVP, and...

This part is a Kit with Impeller, Seal and Seal Tool for LX 3536 1431701-03 Pump.. Impeller & Seal Kit LX 48 frame 1.5 HP Hotspring   NOTE: If you have a Jacuzzi, Sundance, Thermospa or D1 hot tub with a 6500- number on the label there are no...

This 1431701-03 Vendor Code 3536 48Fr  LX Pump 2" X 2" 1.5HP 2 Speed 115V Complete Pump and motor.. This pump is a replacement for the orginal 1431701-03 pump found on some 3536 Code hottubs.. NOTE about Watkins Wavemaster Complete Pumps:...

This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type   Closed Face Impeller Diameter...

This 1.5 Horse Power 39583-03 13.8/3.8 Amp (2) Speed 48 Frame Complete Pump is a replacement Watkins Wavemaster LX Brand Pump. These pumps usually have the part number 39583-03 on the label for a Watkins Version. It is about 7 1/4"" across the face of...

This 1016029 3.0HP Horse Power 6.0 Amp (1) Speed 56 Frame Complete Pump is a Master Spa Pump.. This is a Direct Replacement Master Spa Part Note: Master Spa has replaced this obsolete pump with a compatible pump and that new style is what you will...

This Pump is a Complete Pump for Aqua-Flo Pumps with the number 0982701 with a Vendor Code 04281... This pump is a 48Frame 230V 2 Speed with a 2.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads.....

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 5.0HP I would call it a 4.5HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 4.0HP I would call it a 3.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 3.0HP I would call it a 2.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures...

This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need...