Pumps and Related Parts

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End.  For just internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

This Impeller and Seal Kit is used ONLY in a 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures...

This Impeller and Seal Kit is used ONLY in Intertek Impeller & Seal Kit for Circulation Pump, TheraMax II, 1/15hp, 230v, Sundance or Jacuzzi, 02410512-2 or 6500-907 Pumps Only. The impeller may have the number B706-01, B706-02, B706-03, B706-04,...

This Impeller and Seal Kit is used ONLY in Intertek LX 48WTC, 1/8HP, 115 or 230V, WTC0153, Side Discharge Pumps Only. The impeller may have the number B706-01, B706-02, B706-03, B706-04, B706-05 on the back. The impeller measures about 3 5/8" across but...

This Impeller and Seal Kit is used ONLY in Intertek WTC50 Pumps Only. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures about 3 5/8" across but the size can vary but this impeller is the...

Rare Vico / Balboa Ultima 2.0 HP, 230 Volt, 56 frame spa pump assembly in 2 speed. This side discharge pump has 2" unions that measure 3" across the male threads. Most Ultima pumps are 48 frame but this model uses an adapter plate to adapt the 48 frame...

3.0 HP impeller for the Waterway EX2 pumps assemblies. This impeller is normally found on motors with a 10.7-12.0 amp motor and fits between the Face and the Volute of an EX2 Wet End. I would advise replacing the Seal when you replace the Impeller. The...

Single speed 48 frame spa motor rated at 1.5 HP. This dual voltage single speed motor can run at 115 or 230 volts. The amp rating on this motor is 7.7 amps at 230 volts and 15.4 amps at 115 volts. This thru bolt motor will fit any North American wetend...

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a new release from Aqua-Flo designed to be a less expensive replacement for Aqua-Flo XP2e  This pump is a...

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 56 frame XP2e 3.0HP 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about...

US Motors / Nidec 1.0 HP motor, 115 volts, 2 speed with no top mounted capacitor. This 10.3 amp 48 frame motor can be used with many brands of pumps and wetend. Some brands this motor will fit are Waterway, Aqua-Flo, Vico, Balboa, Sta-rite and many more...

This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs. . Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  Note: Rubber mount not included in this listing it can...