Electronic Control Systems and Parts

Balboa BP2000 retro-fit control system with TP700 Color LCD topside control panel. This high end BP2000 system is Balboa's top of the line unit offerring multiple pump support and feature rich settings for filtration, purge times and much more. This...

This part is a 72" AMP Style 3 Wire Cord With Male Plug that is used on a 1 speed pump or blower.. Note: To use this cable with a blower you will cut the spade connector off the end off the end and attach with crimp connectors.  The Wire colors are...

This part is a 60" AMP Style 3 Wire Cord With Male Plug that is used on a 1 speed pump or blower.. Note: To use this cable with a blower you will cut the spade connector off the end off the end and attach with crimp connectors.  The Wire colors are...

This part is a Amp Cord, Pump 1, 2-Speed, 4-Pin Amp, 14/4, 96" Long, Plug Attached, w/Terminated Ends. The Wire colors are as follow on most systems: Red=High Speed Black=Low Speed White=Neutral or Common Green=Ground There are exceptions to these...

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If your original control used cords other than Amp Cables...

HydroQuip Temperature Sensor, 72" with 1/4" diameter temp probe. Common to find these used on the Versi Heaters and 9700 series spa controls. For SSPA, USPA, MP, 6200, 9200, 6500, 7500, 8500, 9500, 9700, 6330, 9330 series of spa packs and controls by...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...

The next generation feature rich Balboa BP7 control system with a 5.5KW heater bundled with the sleek rounded rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system,...

The MODPACK 202 is a universal replacement spa control system for a (2) Pump and Blower System with or without a Circulation Pump. Heater assembly is 15″ long, has 2" unions (3" ID on female threads) and it is mounted to the bottom of the control...

The MODPACK 202 Low Flow is a universal Low Flow replacement spa control system for (1)Circluation Pump (2) Jet Pumps and Blower System and 12V light. Heater assembly is 15″ long with a 3/4" Barb Connection kit, it is mounted inside of...

This part is a Balboa Circuit board for a Artesian Spa with MBP20P5R1A on the board tag.. The compatible topside would be a 4 Pin MOLEX system plug not a phone plug.. The original board number would have been 56346 this is the newest version.. Some of...

This part is a Cable and Plug for an In.Link on system on IN.XE and IN.XM systems Aeware Gecko. The cable is for Pump 1, 2-Speed, 15A, 230V, 8' Cord. Cord Type Cord Appliance Pump, 2-spd Pump Cord Length 8ft, 96" Male End Plug Style in...