This part is a Dynasty Handle for 4 1/4" Valve with 1/2" Stem, 2-Way Assembly Complete Shut Off Valve.  If you need the valve this handle fits Click this Link: Dynasty, 4 1/4" Valve, 2-Way Assembly, Complete Shut Off Valve, 1 1/2" x 1 1/2"  

This tool is a Flex Pipe or Vinyl Tubing Cutter works on air line 3/8" up to water lines 1".. 3/8" air, 1/2" Water, 3/4" Water Vinyl or Flex and 1" Water Vinyl or Flex..  Tool Type Group    PlumbingTool Type    Tubing...

This Replacement LX Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2" only that would be about 8.0 Amps at 230V Vendor Code 3536..  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top...

This part is a PC Board, Balboa, LPI501ST, (2) Pump System, Energy Saver, 480-0152 and others. This Board operates (2) Jet pumps or (1) Pump and Blower, Light and a Circulation Pump. Replaces the circuit board LPI501ST for Balboa Control System 56704...

This part is a Double 3/4" Barb Adapter x 1" Street.  The Glue Side glues inside a 1" Fitting (like a coupler) and the other side would accept (2) 3/4" vinyl tubing that would measure 3/4" inside diameter.

This part is a Set of (10) 3/4" Barb x 3/4" Smooth Barbed Coupling used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the...

This part is a Set of (5)  3/4" Barb x 3/4" Smooth Barbed Couplings used to couple 3/4" ID Tubing together. 3/4 Inch Barb X 3/4 Inch Barb..  Note: We only use smooth barbs now because the barbed style does not fit every tubing style and the...

This item is a set of (20) Barbed Coupling used to couple 3/8" ID hose together. An example would be the air line on a Pump Bleeder, Jet Body or Air Manifold..   For other 3/8" related items click this...

This item is a set of (10) Barbed Coupling used to couple 3/8" ID hose together. An example would be the air line on a Pump Bleeder, Jet Body or Air Manifold..   For other 3/8" related items click this...

This kit is a 3' Long RADKit® designed to go onto the outside of a 1 1/2" fitting and seal off the area between (2) 1 1/2" Fittings Outside to Outside.. An example would be if you had a Suction fitting dripping at the glue joint and there is a piece...

This kit is a 6' Long RADKit® designed to go onto the outside of a 1 1/2" fitting and seal off the area between (2) 1 1/2" Fittings Outside to Outside.. An example would be if you had a Suction fitting dripping at the glue joint and there is a piece...

This part is a 2" Slip X 2" Slip X (4) 3/4" Ports Manifold open style.  This part used in tubs where 3/4" soft pipe which measure 1" OD or 3/4" ID glues inside the ports and goes to the back of each jet in the tub and is...