Air Venturi System Parts

This is a very unusual Air Manifold we have found in Sundance brand Hot Tubs nut can be found in others as well.. It is a 16-port manifold with (16) 3/8" barbs and 1-1/ 2" slip x 1-1/2"spigot or street meaning that a piece of 1 1/2" which measures about...

6 Port manifold with 3/4" ribbed barbs and (6) 3/8" smooth barb ports. This unique manifold can be can be cut into multiple manifolds of 2, 4, or 6-ports. Includes 2 3/8" barb plugs. We have seen these parts used in water and air systems on spas and hot...

This part is a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold. The Manifold recieves a 1" pipe on one side and then slips into a 1" fitting on the other side and /or the top with (8) 3/8"...

Manifold/Barb Fitting

12-port manifold with 3/8" barbs and 1"s x 1"spg inlet/outlet

This part is a 10 Port Air Manifold that is 1-1/2" Slip x 1-1/2"Street with (10) 3/8" Slip Barbs. The 1 1/2" Slip end accepts a pipe or fitting that would measure about 1 7/8" OD and the Street end measures about 1 7/8" OD and would gleu inside of a 1...

This part is a Air Manifold, 3/8" Barb, 6 Port, Flow Thru, 1/2" Slip on both ends..The outside of each end could be considered 3/4" Spigot but it is really a tight fit.. Barb/Port Size 3/8" Barb Port Type Barb (b) Number of...

Top Draw Air ControlPart only

This part is a Hydro Air 1" Top Draw Air Control Stem Assembly only.. It measures about 2 5/8" Across the top and the threaded hole this would screw in would be about 1 3/8" Wide.. the shaft from the bottom of the lid would be about 2 1/2".. See attached...