Air Venturi System Parts

This part is a Sundance or Sweetwater brand Spa Air Venturi Control knob .. 780 Series Air Control 2003-2006   Jacuzzi, Sundance, Air Control, Venturi Body and Stem, 780, 880, Elite Series, J-300, J-400 Gasket, Jacuzzi, Sundance, Air...

This Kit consists of 4" of 3/4" Inside Diameter Clear Tubing, (2) Clamps and (2) 1" Street x 3/4" Barb Couplers.. This Kit is used to connect your 3/4" pipe connection that is being replaced to a more modern outside barb type seal... You achieve the 3/4"...

This part is a Waterway 1" Spa Hot Tub Air Control Valve with the hidden type cap to be used under a larger handle style cap. You use this valve to replace the guts of an installed valve and don't use the body.. The Valve Cap Width is approx. 2 11/16".....

Waterway Air Control Handle Angled Lever Style Gray Square Hole size about 9/32" to fit on top of the air control..

This part is a 3/4" Spin To Win Kit for 3/4" Plumbing repairs where you are connecting old 3/4" Plumbing that measures about 1" OD to new plumbing.. The kit includes a 6" Piece of 3/4" Flex Pipe that measures about 1" OD and a 3/4" Coupler.. This type...

This part is a Complete Short Body Air Control that requires a 1-3/4" hole size has a 2-1/2"face diameter a Designer Cap and is Gray 1" Slip glue fitting..The pipe or fitting that would glue inside of this would measure about 1 1/4" OD..The Body length...

This part is a Complete Air Control that requires a 1-3/4" hole size has a 2-1/2"face diameter a Designer Cap and is Gray 1" Slip glue fitting..The pipe or fitting that would glue inside of this would measure about 1 1/4" OD..The Body length of this...

This Part is an Air Manifold 4-port manifold with (4) 3/8" barbs and 1 1/2" Slip x Dead...   Barb/Port Size 3/8" Barb Port Type Barb (b) Number of Ports 4 Manifold Fitting Type Flow-Thru Manifold Plumbing Size "A" 1...

This part is a (1) 1 1/2" Slip X 1" Slip Coupler PVC Plumbing Fitting. The Coupler receives a 1 1/2" fitting which measures 1 7/8" OD on one side and then receives a 1" fitting which measures 1 1/4" OD on the other side...

This is a 1" Slip x Spigot Plug which measures 1 5/16" OD on one end and 1 5/16" ID on the other side it can be used to plug off a 1" Slip port which measures 1 5/16" ID on a manifold or other fittings or Cap a 1" Slip fitting that would measure about 1...

This is a Set of (3) barb plugs used to plug off a 3/8" port on Air manifolds or Air Sides of Jet Bodies that are above the water line of the tub. We offer many different plugs based on the brand of manifold.

This part is a Manifold that features (6) 3/8" Barbs and is Flow Thru, 1-1/2"slip x 1-1/2"spigot.. To plug the barbs you can use these plugs: Barb Plug 3/8" Slip for Air Manifold and more Waterway Set of (3) Barb Plugs 3/8" Slip for Air Manifold and...