This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 56 frame XP2e 3.0HP 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about...

Universal replacement canister with aromatherapy beads. Standard size fits all spas. This particular canister comes equipped with fresh smelling Eucalyptus beads. Eucalyptus Characteristics: Eucalyptusy All Canisters with fragrance beads are for use...

This Water Wand Filter Cartridge Cleaner is used along with a standard Garden hose to clean your filter pleats.. You simply attach it to a water hose and remove the filter from the tub and wash the filter please from top to bottom in a vertical...

This Kit Consists of (1) 2" Gray Bullet Jet Face Internal, (1) Ozone Jet Body with a 3/4" Barbed Water Connection and a 3/8" Barbed Air Connection, (1) 1/2 oz Tube of Silicone Sealer, (6") of 3/4" Tubing with (1) 3/4" x 3/4" Barbed Coupler and (2)...

This Kit Consists of (1) 2" Gray Bullet Jet Face Internal, (1) Ozone Jet Body with a 3/4" Barbed Water Connection and a 3/8" Barbed Air Connection, (1) 1/2 oz Tube of Silicone Sealer, (6") of 3/4" Tubing with (1) 3/4" x 3/4" Barbed Coupler and (2)...

Faceplate O-ing for the Waterway SVL56 pool pump regardless of horsepower. This one of a kind gasket seals the faceplate and the sealplate once the bolts are tightened down. This part is in limited supply. Part Type Gasket Inside...

This item is a 3 1/4" Wide 6 Spoke Graphite Gray Knob for 1" Air Control Valve Knob. The outside measurement is about 3 1/4" and the center hole is about 5/16".. NOTE: There is a Waterfall Control version of this knob that measures about 3 5/8" wide with...

Overlay sticker for the Balboa TP700 topside controls that have three pumps. The buttons on this overlay are marked as Jet, Jet2, Jet 3, Light, Aux on the left and 4 directional keys and program button on the right. Manufacturer Balboa Water...

Overlay sticker for the Balboa TP700 topside controls that have two pumps. The buttons on this overlay are marked as Jet, Jet2, Light, Aux on the left and 4 directional keys and program button on the right. Manufacturer Balboa Water...

This part is a Jet Body with a Stainless Steel & Black Jet , Rising Dragon, Ozone Cluster, Air 3/8" Barb x Water 3/4" Barb, Ell.. To make a connection from this Barbed Jet body back to either Clear Tubing or 3/4" Flex Pipe use this Kit:  3/4"...

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 4000 76228 heater... This is a generic replacement for the various versions of Watkins/Hot Spring/Tiger...

US Motors / Nidec 1.0 HP motor, 115 volts, 2 speed with no top mounted capacitor. This 10.3 amp 48 frame motor can be used with many brands of pumps and wetend. Some brands this motor will fit are Waterway, Aqua-Flo, Vico, Balboa, Sta-rite and many more...