This part is a Diverter 3 3/4" Wide Valve 6 Spoke Graphite Gray Hot Tub Spa 2" x 2" x 2" Video How To.   The 2" Slip fittings receives a 2" pipe or fitting that would measures about 2 3/8" OD.. We also offer This Diverter in a Kit...

Balboa VS100 circuit board and heater kit made to replace the discontinued VS100 spa pack and the previous versions of their retro-fit kits. This circuit board will fit into any previous VS100 or Dreammaker RS101 box. The 10" heater is rated at 1.0 KW at...

This kit is a Diverter in a Kit which Includes 4oz of Hot Blue Glue and 4oz of Purple Primer and a Graphite Gray Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2) 2" Street Slip Ells. This Kit can be used to cut out an old...

This kit is a Diverter in a Kit which Includes a Graphite Gray Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2) 2" Street Slip Ells.  This Kit can be used to cut out an old Diverter and install this new Diverter in its...

This part is a Diverter 3 3/4" Wide Valve Control Graphite Gray Hot Tub Spa 2" x 2" x 2" Video How To.   The 2" Slip fittings receives a 2" pipe or fitting that would measures about 2 3/8" OD.. We also offer This Diverter in a Kit...

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End.  For just internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

Air Bleed Valve, Pentair Rainbow RDC/RTL/Bromine If you need an o-ring for this part this is the link: O-Ring, 3/8" ID, 1/16" Cross Section

CTI / Correct Tech Industries 6 button Minimax 250 topside control panel. This 7 button oval topside measures 6" x 3" and has a 6 foot cable with phone jack connector. This universal panels replaces many different discontinued versions.  Please...

Overlay sticker only for the Balboa TP540 topside control panel. This 6 button overlay is for tubs with a jet pump and auxiliary pump or blower.  The buttons are marked: Warm, Cool, Menu, Jets, Aux and Light The base topside for this sticker can be...

Overlay sticker only for the Balboa TP540 topside control panel. This 5 button overlay is for single pump or jet models.  The buttons are marked: Warm, Cool, Menu, jets and Light The base topside for this sticker can be found here: Balboa TP540 Oval...

Balboa TP540 base topside control panel only. This oval 6 button (some had less because the sticker covers unused buttons) topside control is compatible with many BP spa packs like the BP501 and BP7. The TP540 measures 8-5/16"-x-2-1/2" and requires a...

This Impeller and Seal Kit is used ONLY in a 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures...