This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is used above the water line to allow constant air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. This type Check...

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. These pumps usually have the part number WBC150 on the label for an Intertek Pump.  Manufacturer Lingxiao-Pump Pump Model WBC Speed 1...

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Hot Tubs. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version...

This part is a Stem Washer for a Gate Valve on 2003 and under Sundance® Hot Tub Diverter. This Diverter Stem washer Slides onto the Diverter top under the cap.   Click this link for other Sundance Diverter Parts: Sundance® Diverter...

This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo FMHP, FMCP, FMVP, and...

This part is a replacement filter for Dual Filter applications in 2002+ Master Spas and Down East Spas. This filter is found on the inside of a larger filter and uses the stalk system with a center stalk and a threaded cap. You can find these different...

This complete pump and motor is a Aqua-Flo replacement Pump, 39583, 115V (2) Speed 48 frame 2" x 2" pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a...

This part is a 15" Heater Tube with a 5.5KW Heater in it that is found in some 780 & 680 Sundance Series tubs with Balboa Equipment.. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1 Amp Hot Tub Spa Part Universal...

This part is a 15" Heater Tube with a 5.5KW Heater in it that is found in some Jacuzzi Premium J-300 Series tubs.. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1 Amp Hot Tub Spa Part Universal How To Video HI LIMIT:...

This part is a Drain Valve with 1/2" inch Slip Glue In style fitting.. If you need to make this a barb style click here for the kit: 3/4" Tubing Barb Connect Kit with Glue, 3/4" Barb x 3/4" Smooth Barb with Clamps and Tubing For the Large Valve Click...

This part is a VS504SZ Board that operates (2) Jet pumps and a Blower Or 3 Pumps..  Light and a Circulation Pump if equipped.. This board is used mostly with (6-7) Button Topsides.. Circuit Board Application Balboa Water...

This part is a Kit with Impeller, Seal and Seal Tool for LX 3536 1431701-03 Pump.. Impeller & Seal Kit LX 48 frame 1.5 HP Hotspring   NOTE: If you have a Jacuzzi, Sundance, Thermospa or D1 hot tub with a 6500- number on the label there are no...