Hot Tub Parts of America

This part is a Balboa Heater M7 Sensor. This Sensor comes with the wire, Connector, and The Screw down cap. It DOES NOT include the tube and the tube side mount. You will normally not need the...

120 Wye, 2" Slip x 2" Slip x 2" Slip     Each of these Slip Fittings accept a 2" Pipe or fitting that would measure about 2 3/8" Outside Diameter.. (PVC) Plastic Pipe Fittings,...

This it is a 115V to 12V Transformer. This Transformer can be used to power a 12V light bulb or bulbs using a 115V Power Source or to replace a bad Light Transformer in a Light Control box that uses...

This Item is a LX 1.0 Horse Power 12.0-13.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Lifesmart Brand Hot Tubs. It may have a Watkins Vendor Code 4081 LX Brand Pump...

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Hot Tubs. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part...

This Pump is a Perfect Replacement for a LX 1431601-03 Pump it is a 3.0 Horse Power 12.0/3.5 Amp (2) Speed 56 Frame Complete Pump. It is about 7 1/4"" across the face of the pump, it measures...

This 1431701-03 Vendor Code 3536 48Fr  LX Pump 2" X 2" 1.5HP 2 Speed 115V Complete Pump and motor.. This pump is a replacement for the orginal 1431701-03 pump found on some 3536 Code...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it...

You are buying a 1 1/2" Heater Split Nut Only which includes the split nut and (2) Screws for use with a 1 1/2" Heater Union that would measure about 2 3/8" OD... The Heater Flange Split Nut...

This part is a1 1/2" Heater Split Nut Kit which includes the split nut , (2) Screws and a gasket for use with a 1 1/2" Heater Union that measures about 2 3/8" OD.. The Heater Flange Split Nut...

You are buying a 2" Heater Split Nut which includes the split nut and (2) Screws for use with a 2" Heater Union which would measure about 3" Edge to edge on the threads this split nut screws on...

This part is a Standard 2 1/2" Pump Union O-Ring. The O-Ring is 2 1/2" Center to Center across and fits some unions but there are exceptions so please see the pictures and compare...