Hot Tub Parts of America

This part is (1) Clamp Kit that fits 1" OD , 3/4" ID Clear Hose ONLY. These are used for connecting Clear Hoses to many PVC Plumbing Parts Usually Water Manifolds in Hot Tubs. You can put...

This part is a Single of Jumper Wire that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4...

This kit is a Watkins Style Hot Tub Spa Cover Strap Latch Repair Kit with (1) Lock Latch, (1) Strap Repair Buckle and (1) Latch Clip with (3) Screws and (1) Key that fits the original Factory covers...

This Kit is (1) 3/4" Barbed Coupler with (2) Clamps that fits 1" OD , 3/4" ID Clear Hose . These are used for connecting Clear 3/4" ID Hoses together in Hot Tubs. You can put...

(1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Self-compensating hose clamp...

This part is a Watkins Diverter Bezel Cover White 33833 for some 1993-2003 Hot Spring tubs.. 

The kit is a Set of 10 Replacement Diffusers for a 2.95" to 3.25" Pentair Cyclone Micro Jet made by Pentair. Note: Jets are NOT Included only Diffuser!! I also have the...

This kit is a (12) piece Clamp Kit that fits 1" OD , 3/4" ID Clear Hose ONLY. These are used for connecting Clear Hoses to many PVC Plumbing Parts in Hot Tubs. You can put these clamps with...

This Kit is a (18) piece Clamp Kit that fits 1" OD , 3/4" ID Clear Hose ONLY. These are used for connecting Clear Hoses to many PVC Plumbing Parts in Hot Tubs. You can put these clamps...

This part is a 2" which measures about 3" ID Heater Split Nut Kit which includes the split nut , (2) Screws and a gasket for use with a 2" Heater Union that would measure about 3" Edge to Edge on...

This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut, (2) Screws and a T Gasket for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on...

This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the...