Hydro-Air 6 Tip Wall Fitting ToolMetal tips of our tool grip recessed slots, better than the plastic tool that strips out easily.Use on Hydro-Air wall fitting with 6 recessed slots. (e.g. Hydro-Air standard wall fitting)

You are purchasing a New Balboa MAS470 Spa Hot Tub Board found in Master Spa and Down East hot tubs.  

You are Buying a Lo-Profile Drain Assembly, 3/4" Barb, Black, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by simply adding silicon...

This Kit is a Silicone Kit & Lo-Profile Drain Assembly, 3/4" Barb, Black, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by simply...

Half Union Fitting Complete Set... The Threaded side measures about 3" Inside and the Slip Glue end measures about 1 7/8" Inside Diameter for a 1 1/2" fitting to glue inside or 2 2/3" Outside Diameter for a 2" fitting to glue on the outside....

This 1 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Guangdong LX Brand Pump. These pumps usually have the part number 48WUA1001C-II on the label for a Watkins Version. Watch the video for instruction on how to Identify...

This Kit is a 1-1/2" Manifold Coupler Kit for 1-2 Manifolds. The Kit consists of (1) 1 1/2" Coupler, 1 1/2"Slip X 1 1/2"Slip (6") of 1 1/2" Flex Pipe, (1) 1/4 Pint of Hot Blue Glue and (1) 1/4 Pint of Purple Primer. The kit is to be used...

This Kit is a 1 1/2" Coupler and a 6" Piece of 1 1/2" Flex Pipe used when gluing new plumbing to old plumbing. We call this Technique "Spin it To Win it" Meaning you spin the coupler onto the old plumbing when you are gluing new to old and then purple...

This is a 1/15th HP Impeller for an Aqua-Flo Circulation Pump 48 Frame Side or Center Discharge CMHP, CMCP and FMVP Series Wet End. This Impeller fits between the Face and the Volute of an Aqua-Flo CMHP, CMCP and FMVP Series Wet End. I would advise...

This video is about The Spa Guy repairing a Leak on a 2" Soft Pipe Glue joint of tee connection instead of replacing the tee you use our RADKIT to repair the leak.....

This parts is an Artesian, Resort Series, Filter, Cartridge,  6 sqft, 1-7/8" Hole, 2" male pipe thread , 6" Wide, 7" Tall.. This filter is found in the center of the filter housing usually between two larger filters and has a Gray top on it...

This 90 Tee Glue Kit is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This Item is the 90 Ell found on the pressure side of a Laing pump with a 3/8" bleeder line...