This 2 button Command Center panel is no longer available and we now send the 4 button version. Same panel but will have two extra unused buttons. See pictures This part is an Analog Topside Control, Air, Tecmark, 115V, 2-Button, Temperature Display with...

This part is a Power Right Wet End Pump Face O-Ring Only fits around the Face of a Power Right Pump Face Generally found on Cal Spaa which has 2" inlet and outlet which measures about 3" across the threads...   Related Parts: Impeller,...

This part is a VGB Compliant Suction 90 Degree Sweep Elbow Assembly made by Waterway it is a used with a 5" Suction Wall fitting that has a 2 1/2" Slip Hole... This fitting accepts a 3/4" tube on a the barb fitting and a 2" pipe which would measure about...

This part is a VGB Compliant Suction Assembly made by Waterway it is a 5" Ultra Flo, 3-1/4" Hole Size, 2-1/2" Slip, Gray... Virginia Graeme Baker Compliant Flow rate = 264 gpm (portable spas only) Face size 5" Hole size 3-1/4" The 90 Sweep with...

This part is a Valve Stem Gate that is found inside of a Black Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port..  Note: This part...

This part is a Black Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of each...

This part is a 1" Spin To Win Kit for 1" Plumbing repairs where you are connecting old 1" Plumbing that measures about 1 1/4" OD to new plumbing.. The kit includes a 6" Piece of 1" Flex Pipe that measures about 1 1/4" OD and a 1" Coupler.. This type kit...

This part is a Valve Stem Gate Only that is found inside of a CMP Brand Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve Gate made by CMP.. If you need the complete valves and other parts that fit this...

This part is a Gray Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by CMP, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of each...

This part is used to Test All Sensors On:LCD LX-20, LX-25, LX-30, SUNDANCE 400, 600, 750, 800 and 850 Circuit Boards. It is able to Simulate a Working Temp Sensor, Hi-Limit and Flo-Switch for All the Circuit Boards Noted Above. It can be Considered a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...