NOTE: The Design of this Impeller has changed and the new design will not fit the 2" x 2 1/2" housing and there are no imepllers that will so you will need to purchase a complete wet end. We believe it will fit the 2 1/2" x 2 1/2" housing. Also the...

  NOTE: This Seal will NOT Fit Sundance® or Jacuzzi® Tubs with a Guangding LX Wet End for those parts click here Jacuzzi® & Sundance® LX Parts    This Seal Set is used ONLY in Guangdong...

This Part is a Basket for a Waterway Hi-Flo Above Ground Pool 6" Trap... Basket Type    PumpTop Outside Dimension    5-3/4"Top Inside Dimension    4-5/8"Basket Height    7-1/2"Bottom Outside...

This filter Fits Some AquaTerra & Freeflow Spas, it is a 40 Square Foot Filter Cartridge that is 5-3/8" Outside Diameter x 9-1/2" in Length and features a 1 1/2" MTP Fine Threaded Male Fitting which measures about 1-3/4" Edge to Edge....

This part is a CMP brand Pressurized Filter Cap Bleeder Plug with a Wing Nut handle and O-Ring..

This part is a 15" Heater Tube with a 4.0KW Heater in it that is found in some Jacuzzi Premium J-200 Series tubs and some Sundance 680 & Del Sol tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch...

This part is a 15" Heater Tube with a 5.5KW Heater in it that is found in some Jacuzzi Premium J-200 Series tubs.. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1 Amp Hot Tub Spa Part Universal How To Video HI LIMIT:...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V or 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which...

This part is no longer available, but we do have a replacement here: Hydroquip / Gecko ECO-1 Crescent Shaped 4 Button Topside Control Panel   This part is a Eco Series Hydro-Quip, Eco 5, 4 Button, (1) Pump, Light, Aux, Small Rectangle, 10ft...

This part is a 9" Fat Graphite Single Pin pillow with the number 25702-247 in the back of it.. This pillow fits Hydro Spa, Premium Leisure and Platinum Legend and Others. It is 9" long and  It is Graphite in color.  

This part is a Balboa E4 4 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.        The button configuration of Blower, Jet, Temp and Light left to right. This Overlay can be used to replace your original...

This is a 3HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo XP2 Impeller...