G-Series circuit board made by Balboa Water Group for Leisure Bay Spas. Original Processor number is LB501SR1A. Normally mates to plastic VS Series control box part number 54340(0x). This board will also replace the discontinued LB500S. Uses an 8 Pin...

This part is a Cal Spa Replacement Version of the Genesis 7000 or 9800 System Retrofit Topside that is replacing the original topside that was scrapped because it had so many issues. Cal Spa replacement for Cal Spa dash board style topside control...

This part is a Bath Style (1) Speed Jacuzzi J-Pump, 115v, J Pump Style Fitting, 7.5A, w/Air Switch...   Note: This pump is equipped with an air switch. If the motor does not start upon plugging it in, the switch may be in the off position...

  Daughter Board 2 (DB-2) Kit for Waterway NEO 2100 Spa Control System. Used to add (2) extra 2-Speed pumps to the system.Kit Includes: (3) 1/4" Hex #6-32 x 1.5" Standoffs, (3) Screws and (1) Zip Tie.     NOTE: WE DO NOT ACCEPT RETURNS...

This part is a Daughter Board 1 (DB-1) Kit for Waterway NEO 2100 Spa Control System. Used to add an extra 2-Speed pump to the system.Kit Includes: (3) 1/4" Hex #6-32 x 1.5" Standoffs, (3) Screws and (1) Zip Tie. NOTE: WE DO NOT ACCEPT RETURNS ON...

This part is a 5.5kw 15" long Heater Flo Thru Tube found in Waterway Neo Series control packs.. You can replace just the element and not the tube and save some money the kit can be found here: (D) Heater Element 5.5kw Gasket Kit Hot Tub Spa Part M7...

This topside is the large version of the E4 topside.. from left to right is Jet, Jet, Temp then Light.. The type is MVP260, VL260 and others.. This is an ideal replacement for Viking Brand Hot Tubs and has a 7' cord so if you need it to work on the...

The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side. Heater assembly is 15″ long, it is mounted to the...

Gasket, "L", Waterway Ozone or Cluster JetFits a Jet Body with a 2" Jet face diameter, 1" hole size.. Part Type Gasket Jet Part Type Gasket/O-Ring Manufacturer Waterway Inside Diameter 1"id Model Ozone/Cluster Gasket...

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

The BP Series WiFi Module Kit allows you to access your hot tub via a direct connection anywhere in the local proximity of your tub, anywhere in your house that you can connect to your local WiFi network, or anywhere in the world you have an...