This part is a Wall Fitting , Hydro-Air, HAI, 3-Port Butterfly Jet, 3-1/4" Hole Size, White.. Jet Part Type    Wall FittingManufacturer    HydroAir/BalboaModel    3 Port ButterflyHole Size  ...

 This part is a Tread, SR Smith, Swan, 17-1/4", Plastic, White, Generic Note: If you are replacing the Inter-Fab treads you must replace all three for this to work..   Application Type LadderHandrail/Ladder Part Type Tread,...

This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2 wetend. You...

This part is a PVC Tee, 1"slip x 2"slip x 1"slip.. You can make your connection back to the small side using the below kit..  Connect kit for 1" Soft pipe Click Here.. 1" Connect Kit Jacuzzi J Pump Fittings found here: Jacuzzi® J Pump...

This part is a Complete VL-200 or Eco-200 topside that is used on some Balboa 4 button systems..  It features Jet, Temp, Light reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is 72" long.. Compatible with the...

This Filter Core and Standpipe with Valve is made specifically for Oval Shaped Filter Cartridge that is 6-1/4" Outside Diameter on the Widest Part of the Oval x 9-3/4" in Length. Please don't be silly like Charles and think this is a filter and...

This part is a Heater Assembly for a HydroQuip CS800 Control Pack.. 4.5kW, 230V, 2" x 15" Long..  CS800 heater, 4.5kW, 2.25”x15”, 304SS, PSI tap, cover plate and studs. Includes 2” ridged gaskets.   Heater Style -...

This 2.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on Sundance tubs and is also on Jacuzzi...

Note: When you order this pump you will receive the newest version of the pump which is a baseless 2.5 HP pump and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

This filter is 13 1/2" X 4 15/16" and has a female SAE Large Thick Thread that is 2" which would really measure about 2 1/4-2 3/8" ID. This filter is found in Dynasty Bahama Tubs and others. If you have the shorter version of this filter which is 9 1/4"...