This LX 1019801-03 or 39577-03 Vendor Code 3536 2HP Impeller that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the...

This kit is a (1) Standard Balboa Board Replacement Repair Relay along with (1) Spade to Spade Jumper and (1) Spead to Loop Jumper used to do a beef up Jumper Style repair on Some Balboa VS and EL Boards and others...  When replacing board relays...

This part is a Complete 4.5HP Vico Ultima Brand 48frame 2 Speed Pump. Although this pump is called a 4.5HP it is really not even close it is a 9.0/2.8A 2 Speed 48 Frames which at 230V ia really 1.5hp.. 

This part is a Jet Internal, Waterway Poly Jet. Black, 3-3/8" Deluxe Scalloped face, with Massage style internal and Adjustable on/off control. This jet is threaded and the way you remove it is use a flat screw driver and carefully start...

This part is a Complete, Waterway NeckJet, 1-3/4" Hole Size, Pop Out, White, 1/2" Slip.. Neck jet: Water can be turned on/off at spa side by pulling and pushing on nozzle. Hole size 1-3/4", 2-1/2" face diameter Hole Size 1-3/4" Jets...

This 1016029 3.0HP Horse Power 6.0 Amp (1) Speed 56 Frame Complete Pump is a Master Spa Pump.. This is a Direct Replacement Master Spa Part Note: Master Spa has replaced this obsolete pump with a compatible pump and that new style is what you will...

We are offering a Saratoga Spa 27.5 Cartridge, 30sqft, Handle, 1-1/4" Male SAE , 4-3/4" Wide, 11-3/8" Tall.. Application Saratoga Spas Bottom Style SAE Thread Diameter 4-3/4" Length 11-3/8" Media Type 3oz Square...

This Pump is a Replacement for a 0974101-03 or 0974001-03 1.5 HP 230V 8.0/2.6 Amp (2) Speed 48 Frame Complete Pump  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the...

This 1.5 Horse Power 230V 8.0/2.6 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA1502C-II on the label for a Watkins Version. Watch the video for instruction on how to...

This tool can be used to drill out the hole in the boards when changing out relays.. After you desolder a relay you can use these bits to open the holes up then slide the new relay in the holes and solder.. This also helps you to prevent damage to the...

This kit is a Set of (2) Standard Balboa Board Replacement Repair Relays along with (3) Spade to Spade Jumpers used to do a beef up Jumper Style repair on Some Balboa BP Boards and others...  When replacing board relays you may need this drill bit...

This part is a Complete Jet Internal, Hydro Air, 3-1/8" Face Diameter, Micro Adjustable,  VSR, Roto, Smooth, Black... Installation Type Snap In Face Diameter 3-1/8" Jet Part...