This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer..   This kit can be added if you...

This part is a 4 1/8" Wide Diverter Cap & Handle for a 2008+ Hot Spring, Caldera, Tiger River, Watkins Diverter Valve. This Kit comes with The Cap & Handle only. The Valve these parts fit can be found on Hot Spring, Caldera, Tiger River...

This part is a Long Stem Style Repair kit for a 4 1/8" Wide Spa Hot Spring Caldera Tiger River Watkins Diverter Valve. This Kit comes with The Cap, Handle, Stem and (2) Small O-Rings and (1) Large O-Ring. The Valve these parts fit can be found on...

This part is a Spa Waterfall or Neck Jet 1" Control (3) Or-ring Set which includes (1) Large & (2) Small O-Rings only. This 1" Diverter Control O-Ring Kit features (3) Oring/Gasket and is about 1 7/16" I.D. and the groove it fits into is about 1...

This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...

Jet Body, CMP Cluster, 1"hole size, air 3/8" barb x water 3/4" barb This is used with CMP Cluster Jets only Hole Size 1" Air Connection Size 3/8" Jet Part Type Body Air Connection Type Barb (b) Water Connection...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko MSPA Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets.I also offer the element only or the tub and element with no pressure switch...

This Kit is an ACC Smart Touch E-Pac LF with low flow heater Set Up. The heater on this unit isused with spas that have a low flow circulation pump such as a Laing or Grundfos pump. This unit will control a low flow circ pump, 2 speed primary pump, a...

This part is a 1-1/2" Slip (2"Spigot) on each end Clear Check Valve found on Watkins Hot Tubs HotSpring 1989 To Present and All Tiger River Models..   

This part is (1) 30 Amp SC-30 Buss or Cooper Bussman Fuse that is 1 5/8" Long X 3/8" wide found on many Balboa , Gecko, Hydroquip , ACC, Nuwave , Len Gordon , Spa Builders and more Brand Spa Hot Tub Boards and control packs. This Fuse can also be...

HTP B208 Jet and Jet Body with a 3/4" Barbed Water fitting and a 3/8" Barbed Air Fitting..Fits B208 Jets only do not order this for Waterway, Pentair, CMP or other branss...  3-3/4" hole size. Supplied with 3/8" nozzle (12gpm @...

This is a 2.0HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 11.0 Amps on high speed at 230V or 16.0 Amps on High at 115V. Note: The three things you need to...