Balboa Water Group

You are buying a Balboa Generic 7 Button Overlay for a VL701 Topside for a (2) Pump and a Blower. This Overlay can be used to replace your original Overlay no matter what brand as long as the...

Balboa / Vico Ultima side discharge circulation pump with 1.5" unions (2-3/8" thread diameter) can be found plumbed to your heater and is usually set to run 24/7 providing a light and efficient...

This Part is a Back Light Bulb for a Balboa Topsides only. Backlight Bulb Used In Balboa Water Group Digital Topside Controls Series 701 and 724 You will need a Small Flat Screwdriver to remove and...

Balboa Water GroupStainless steel replacement heater assembly, 4.0kW, 230v or 115v, the inside Diamater of the tube is 2" and the overall length of the tube is 15" not including the split nuts on...

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V. This heater measures 2" Inside Diameter of the tube and the length of the tube is 15" with 2" unions that...

Balboa InstrumentsStainless steel replacement heater assembly. 2" x 15" manifold with1/8"npt pressure switch tap, does not include tailpieces

This part is a Balboa Generic 4 Button Overlay for a VL404 Topside for a (1) Pump and a Blower. Size 6 5/8" x 2 11/16"..  This Overlay can be used to replace your original Overlay no matter...

You are buying a Dynasty Excaliber Series Overlay for a K-52 Topside for 2 Pumps, No Blower, Light, Econo, Filter and Up and Down Controls.  This is an oval overlay is 9 7/8""Long and...

Universal Balboa circuit board used to replace many OEM boards that are discontinued. This board will give you all the same functionality as your original. Only differences may be default set temp,...

Temperature&Hi Limit Sensor